May we count your visit with Google Analytics? It uses cookies and sends visit data to Google. You can change this any time under Cookie choices. Privacy

HikingSocks.guide
EN
All socks/DexShell

DexShell Running Lite 2.0 Waterproof Over the ankle

Over the ankle. Cushion not published.

over the ankle · no height published, drawn at a typical heightpadding: the maker doesn’t say where · Waterproof membrane

The footwear outline is schematic. Check the cuff with your own shoes.

View at DexShell ↗Compare this sock

When you want a waterproof membrane for wet trails

An over the ankle waterproof sock with a low bulk knit and an inner layer of 60% coolmax polyester.

Keep in mind: Water can still get in over the cuff, and the three layers take more room than a standard sock, so try it in your shoes before a wet trip. The low cuff sits below a boot collar, so it suits trail shoes and low hikers rather than boots.

Closest in DexShell’s range: the Thermlite 2.0 Waterproof Crew. They differ in cuff, weight and blend; the size chart is the same.

This sockThermlite 2.0 Waterproof Crew
Cuffover the anklecrew
Weightlow bulklight thermal
BlendSeparate blends for each layerSeparate blends for each layer

Compare the two side by side

Materials, padding and sock type

Waterproof membrane · cushion not published

None
Light
Full
Extra
Padding shown schematically. Brand labels do not share a thickness scale.
Exact model
DexShell Running Lite 2.0 Waterproof Over the ankle
Style number
DS20610
Size chart
Unisex chart
Cuff height
over the ankle
Weight (maker’s term)
low bulk
Cushion (maker’s term)
Not published
Cushion location
Not published
Sock type
Waterproof membrane
Layers
3
Material blend
Separate blends for each layer
Wool-free
Yes, no wool or alpaca listed
Facts from
DexShell’s UK and global site

Inner: 60% coolmax polyester, 40% polyamide.

Outer: 95% polyamide, 5% elastane.

Between the inner and outer knits sits a Porelle® waterproof, breathable membrane, which DexShell prints under “Interlining” as PFOA free polyurethane.

What DexShell says about it

“Lightweight waterproof construction.”

“COOLMAX® moisture-wicking inner.”

“Secure ankle compression fit.”

The maker’s own words from its product page; not tested by HikingSocks.guide.

Cushion and weight labels are this brand’s own terms. They are not a shared thickness or temperature rating.

S
M
L
XL
468101214.5

US men’s

Bands follow this chart’s published ranges. S: 4–6 · M: 6.5–9 · L: 9.5–12 · XL: 12.5–14.5

Check the size and the shoe together

Start with the unisex chart for this exact model. Use the size lookup or the whole DexShell size chart to find the published range, then check the heel position, toe room and cuff in your footwear.

The maker does not give a heel-to-cuff measurement. Try the socks with your boots to see whether the cuff sits above the collar. See how sock heights differ.

Try the complete layered construction, not only one layer. Extra fabric can change toe room and pressure inside the shoe. The footwear-fit checklist explains what to check.

Care for the exact pair

Wash at or below 30°C / 86°F. Use a mild detergent. Drip or line dry naturally. Do not bleach. Do not wring. Do not iron. Do not dry clean. Keep away from direct heat.

Use the care lookup for this model’s wash and dry directions. A general wool routine should not override instructions for a membrane, a two-layer construction or a specific treatment.

Two socks to compare with it

Same size chart

DexShell Longlite 2.0 Waterproof Knee High

knee high · not specified. Your DexShell size carries over.

Compare side by side

Same cuff height

Randy Sun CORE Waterproof Ankle

Randy Sun · ankle · not specified.

Compare side by side

Find similar socks

Product sources

For source limits and matching rules, read how this guide works.